locking sleeves

locking sleeves
surface clamping chuck long SK40 6mm A100
surface clamping chuck long SK40 6mm A100
surface clamping chuck long SK40 6mm A100
• Tool holder DIN 69871 form AD / B
• Made of alloyed case hardened steel
• Hardened 58 ± 2 HRC, at least 0.5 mm deep
• Tensile strength in the core after case hardening approx. 950 N / mm²
• DIN 254 cone
• Taper angle tolerance AT3
• Surface accuracy of the cone Ra <0.001 mm
• Hole tolerance H5
• Runout accuracy <0.01 mm
• Balancing quality G 6.3 15000 min-1
• For holding tools with straight shank and lateral driving surface

Delivery: surface clamping chuck with built-in clamping screw, from Ø 25 mm with two clamping screws.
You do not have permission to view the prices
plus 19% tax excl. Shipping costs
surface clamping chuck long SK40 8mm A100
surface clamping chuck long SK40 8mm A100
surface clamping chuck long SK40 8mm A100
• Tool holder DIN 69871 form AD / B
• Made of alloyed case hardened steel
• Hardened 58 ± 2 HRC, at least 0.5 mm deep
• Tensile strength in the core after case hardening approx. 950 N / mm²
• DIN 254 cone
• Taper angle tolerance AT3
• Surface accuracy of the cone Ra <0.001 mm
• Hole tolerance H5
• Runout accuracy <0.01 mm
• Balancing quality G 6.3 15000 min-1
• For holding tools with straight shank and lateral driving surface

Delivery: surface clamping chuck with built-in clamping screw, from Ø 25 mm with two clamping screws.
You do not have permission to view the prices
plus 19% tax excl. Shipping costs
surface clamping chuck long SK40 10mm A100
surface clamping chuck long SK40 10mm A100
surface clamping chuck long SK40 10mm A100
• Tool holder DIN 69871 form AD / B
• Made of alloyed case hardened steel
• Hardened 58 ± 2 HRC, at least 0.5 mm deep
• Tensile strength in the core after case hardening approx. 950 N / mm²
• DIN 254 cone
• Taper angle tolerance AT3
• Surface accuracy of the cone Ra <0.001 mm
• Hole tolerance H5
• Runout accuracy <0.01 mm
• Balancing quality G 6.3 15000 min-1
• For holding tools with straight shank and lateral driving surface

Delivery: surface clamping chuck with built-in clamping screw, from Ø 25 mm with two clamping screws.
You do not have permission to view the prices
plus 19% tax excl. Shipping costs
surface clamping chuck long SK40 12mm A100
surface clamping chuck long SK40 12mm A100
surface clamping chuck long SK40 12mm A100
• Tool holder DIN 69871 form AD / B
• Made of alloyed case hardened steel
• Hardened 58 ± 2 HRC, at least 0.5 mm deep
• Tensile strength in the core after case hardening approx. 950 N / mm²
• DIN 254 cone
• Taper angle tolerance AT3
• Surface accuracy of the cone Ra <0.001 mm
• Hole tolerance H5
• Runout accuracy <0.01 mm
• Balancing quality G 6.3 15000 min-1
• For holding tools with straight shank and lateral driving surface

Delivery: surface clamping chuck with built-in clamping screw, from Ø 25 mm with two clamping screws.
You do not have permission to view the prices
plus 19% tax excl. Shipping costs
surface clamping chuck short SK40 12mm A63
surface clamping chuck short SK40 12mm A63
surface clamping chuck short SK40 12mm A63
• Tool holder DIN 69871 form AD / B
• Made of alloyed case hardened steel
• Hardened 58 ± 2 HRC, at least 0.5 mm deep
• Tensile strength in the core after case hardening approx. 950 N / mm²
• DIN 254 cone
• Taper angle tolerance AT3
• Surface accuracy of the cone Ra <0.001 mm
• Hole tolerance H5
• Runout accuracy <0.01 mm
• Balancing quality G 6.3 15000 min-1
• For holding tools with straight shank and lateral driving surface

Delivery: surface clamping chuck with built-in clamping screw, from Ø 25 mm with two clamping screws.
You do not have permission to view the prices
plus 19% tax excl. Shipping costs
surface clamping chuck short SK40 14mm A63
surface clamping chuck short SK40 14mm A63
surface clamping chuck short SK40 14mm A63
• Tool holder DIN 69871 form AD / B
• Made of alloyed case hardened steel
• Hardened 58 ± 2 HRC, at least 0.5 mm deep
• Tensile strength in the core after case hardening approx. 950 N / mm²
• DIN 254 cone
• Taper angle tolerance AT3
• Surface accuracy of the cone Ra <0.001 mm
• Hole tolerance H5
• Runout accuracy <0.01 mm
• Balancing quality G 6.3 15000 min-1
• For holding tools with straight shank and lateral driving surface

Delivery: surface clamping chuck with built-in clamping screw, from Ø 25 mm with two clamping screws.
You do not have permission to view the prices
plus 19% tax excl. Shipping costs
surface clamping chuck short SK40 16mm A63
surface clamping chuck short SK40 16mm A63
surface clamping chuck short SK40 16mm A63
• Tool holder DIN 69871 form AD / B
• Made of alloyed case hardened steel
• Hardened 58 ± 2 HRC, at least 0.5 mm deep
• Tensile strength in the core after case hardening approx. 950 N / mm²
• DIN 254 cone
• Taper angle tolerance AT3
• Surface accuracy of the cone Ra <0.001 mm
• Hole tolerance H5
• Runout accuracy <0.01 mm
• Balancing quality G 6.3 15000 min-1
• For holding tools with straight shank and lateral driving surface

Delivery: surface clamping chuck with built-in clamping screw, from Ø 25 mm with two clamping screws.
You do not have permission to view the prices
plus 19% tax excl. Shipping costs
surface clamping chuck short SK40 20mm A63
surface clamping chuck short SK40 20mm A63
surface clamping chuck short SK40 20mm A63
• Tool holder DIN 69871 form AD / B
• Made of alloyed case hardened steel
• Hardened 58 ± 2 HRC, at least 0.5 mm deep
• Tensile strength in the core after case hardening approx. 950 N / mm²
• DIN 254 cone
• Taper angle tolerance AT3
• Surface accuracy of the cone Ra <0.001 mm
• Hole tolerance H5
• Runout accuracy <0.01 mm
• Balancing quality G 6.3 15000 min-1
• For holding tools with straight shank and lateral driving surface

Delivery: surface clamping chuck with built-in clamping screw, from Ø 25 mm with two clamping screws.
You do not have permission to view the prices
plus 19% tax excl. Shipping costs
surface clamping chuck extra short SK40 20mm A35
surface clamping chuck extra short SK40 20mm A35
surface clamping chuck extra short SK40 20mm A35
• Tool holder DIN 69871 form AD / B
• Made of alloyed case hardened steel
• Hardened 58 ± 2 HRC, at least 0.5 mm deep
• Tensile strength in the core after case hardening approx. 950 N / mm²
• DIN 254 cone
• Taper angle tolerance AT3
• Surface accuracy of the cone Ra <0.001 mm
• Hole tolerance H5
• Runout accuracy <0.01 mm
• Balancing quality G 6.3 15000 min-1
• For holding tools with straight shank and lateral driving surface

Delivery: surface clamping chuck with built-in clamping screw, from Ø 25 mm with two clamping screws.
You do not have permission to view the prices
plus 19% tax excl. Shipping costs
surface clamping chuck extra short SK40 25mm A60
surface clamping chuck extra short SK40 25mm A60
surface clamping chuck extra short SK40 25mm A60
• Tool holder DIN 69871 form AD / B
• Made of alloyed case hardened steel
• Hardened 58 ± 2 HRC, at least 0.5 mm deep
• Tensile strength in the core after case hardening approx. 950 N / mm²
• DIN 254 cone
• Taper angle tolerance AT3
• Surface accuracy of the cone Ra <0.001 mm
• Hole tolerance H5
• Runout accuracy <0.01 mm
• Balancing quality G 6.3 15000 min-1
• For holding tools with straight shank and lateral driving surface

Delivery: surface clamping chuck with built-in clamping screw, from Ø 25 mm with two clamping screws.
You do not have permission to view the prices
plus 19% tax excl. Shipping costs
surface clamping chuck extra short SK40 32mm A70
surface clamping chuck extra short SK40 32mm A70
surface clamping chuck extra short SK40 32mm A70
• Tool holder DIN 69871 form AD / B
• Made of alloyed case hardened steel
• Hardened 58 ± 2 HRC, at least 0.5 mm deep
• Tensile strength in the core after case hardening approx. 950 N / mm²
• DIN 254 cone
• Taper angle tolerance AT3
• Surface accuracy of the cone Ra <0.001 mm
• Hole tolerance H5
• Runout accuracy <0.01 mm
• Balancing quality G 6.3 15000 min-1
• For holding tools with straight shank and lateral driving surface

Delivery: surface clamping chuck with built-in clamping screw, from Ø 25 mm with two clamping screws.
You do not have permission to view the prices
plus 19% tax excl. Shipping costs
Surface clamping chuck short with eccentric shell SK40 25mm A63
Surface clamping chuck short with eccentric shell SK40 25mm A63
Surface clamping chuck short with eccentric shell SK40 25mm A63
• Tool holder DIN 69871 form AD / B
• Made of alloyed case hardened steel
• Hardened 58 ± 2 HRC, at least 0.5 mm deep
• Tensile strength in the core after case hardening approx. 950 N / mm²
• DIN 254 cone
• Taper angle tolerance AT3
• Surface accuracy of the cone Ra <0.001 mm
• Hole tolerance H5
• Runout accuracy <0.01 mm
• Balancing quality G 6.3 15000 min-1
• For holding tools with straight shank and lateral driving surface

Delivery: surface clamping chuck with built-in clamping screw, from Ø 25 mm with two clamping screws, eccentric sleeve 25/20 Ø20
You do not have permission to view the prices
plus 19% tax excl. Shipping costs
Short drill chuck Form A 2,5-16 mm
Short drill chuck Form A 2,5-16 mm
Short drill chuck Form A 2,5-16 mm

• clamping range 2,5 - 16mm
• Adapter SK40
• For clockwise and anticlockwise rotation
• Burnished
• With Balluffchip bore
• Supplied with Torx® chuck key with T-handle for high clamping force

You do not have permission to view the prices
plus 19% tax excl. Shipping costs
Quick-change tapping chuck with elastic length compensation 69871A M4-14
Quick-change tapping chuck with elastic length compensation 69871A M4-14
Quick-change tapping chuck with elastic length compensation
The optimal and smooth length compensation from pressure and tension ensures compensation for the difference between machine feed and thread pitch. The thread depth can be controlled within ± 0.1 mm. The safety coupling prevents tool breakage in difficult machining tasks in connection with inserts.

Tool holder DIN 69871 form A
You do not have permission to view the prices
plus 19% tax excl. Shipping costs
Quick change insert chuck M4 (fits for tapping chuck 80300001)
Quick change insert chuck M4 (fits for tapping chuck 80300001)
Quick change insert chuck M4 (fits for tapping chuck 80300001)
• Without safety coupling
• Only for clockwise rotation, forced driving when reversing
• For blind hole threads or for thread cutting or thread forming in materials with high strength

Dimensions: L1 = 21.5 mm; L = 7 mm; L2 = 10 mm; D = 19 mm; D1 = 30 mm
You do not have permission to view the prices
plus 19% tax excl. Shipping costs
Quick change insert chuck M5 (fits for tapping chuck 80300001)
Quick change insert chuck M5 (fits for tapping chuck 80300001)
Quick change insert chuck M5 (fits for tapping chuck 80300001)
• Without safety coupling
• Only for clockwise rotation, forced driving when reversing
• For blind hole threads or for thread cutting or thread forming in materials with high strength

Dimensions: L1 = 21.5 mm; L = 7 mm; L2 = 10 mm; D = 19 mm; D1 = 30 mm
You do not have permission to view the prices
plus 19% tax excl. Shipping costs
Quick change insert chuck M6 (fits for tapping chuck 80300001)
Quick change insert chuck M6 (fits for tapping chuck 80300001)
Quick change insert chuck M6 (fits for tapping chuck 80300001)
• Without safety coupling
• Only for clockwise rotation, forced driving when reversing
• For blind hole threads or for thread cutting or thread forming in materials with high strength

Dimensions: L1 = 21.5 mm; L = 7 mm; L2 = 10 mm; D = 19 mm; D1 = 30 mm
You do not have permission to view the prices
plus 19% tax excl. Shipping costs
Quick change insert chuck M8 (fits for tapping chuck 80300001)
Quick change insert chuck M8 (fits for tapping chuck 80300001)
Quick change insert chuck M8 (fits for tapping chuck 80300001)
• Without safety coupling
• Only for clockwise rotation, forced driving when reversing
• For blind hole threads or for thread cutting or thread forming in materials with high strength

Dimensions: L1 = 21.5 mm; L = 7 mm; L2 = 10 mm; D = 19 mm; D1 = 30 mm
You do not have permission to view the prices
plus 19% tax excl. Shipping costs
Quick change insert chuck M10 (fits for tapping chuck 80300001)
Quick change insert chuck M10 (fits for tapping chuck 80300001)
Quick change insert chuck M10 (fits for tapping chuck 80300001)
• Without safety coupling
• Only for clockwise rotation, forced driving when reversing
• For blind hole threads or for thread cutting or thread forming in materials with high strength

Dimensions: L1 = 21.5 mm; L = 7 mm; L2 = 10 mm; D = 19 mm; D1 = 30 mm
You do not have permission to view the prices
plus 19% tax excl. Shipping costs
1 to 19 (from a total of 19)